[News] iOS 6 Rumoured Jailbreak Release

20121221-185232.jpg
At a time when millions of iOS 6 users have been eagerly waiting for an untethered jailbreak for months now, an unknown hacker by the name of “Dream JB” has created a buzz among the jailbreak community by claiming that he will release an untethered jailbreak for iOS 6 Dec. 22. The self-proclaimed hacker has even said that his untethered exploit will be compatible with newer iOS devices such as iPhone 5, iPad Mini, iPad 4 and the new iPod touch.

On 17th December 2012, the Dream JB (Dream Jailbreak) website was updated with a post outlining the progress of the claimed iOS 6 untethered jailbreak for iPhone 5. The hacker said that he would upload a video Wednesday, proving that the untethered jailbreak he created was real. Here’s what the post said:
“Proof will be posted both here and on my Twitter account on Wednesday. As far as the video that will be uploaded, it will be a single-take shot of the entire jailbreak process, including a restart and usage of the device to prove it is untethered. It will be uploaded as raw video straight from my camera to YouTube. So no edits in any form. Thank you all for your patience and support. Also, with the extremely high volume of tweets and over 4500 emails, I will try to address the public as I can. I ask that you read the FAQ before contacting me by email. I will update the FAQ for you all tomorrow morning. I’ve also moved past website updates to the bottom of the page. Goodnight everyone!

I should note that all announcements are made in EST time zone. As of now it’s 8:11 PM EST, proof should be out before 8 PM EST tomorrow.”

— Dream Jailbreak (@DreamJailbreak) December 12, 2012

According to the hacker, the new iOS 6 and 6.0.1 untethered jailbreak will support devices including iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPad (2nd generation and beyond), iPad Mini and iPod touch (4th generation and beyond).

As per the FAQ page provided by the Dream JB website, the jailbreak will be a one-click process and will differ from the previous jailbreak methods using “Webkit exploit” and “userland exploit.” The hacker clearly stated that “any device that normally supports iOS 6.0/6.0.1 is supported by the jailbreak,” meaning A6 devices are included.

Meanwhile, Dream JB’s claims regarding the iOS 6 untethered jailbreak have raised a lot of skepticisms around the tech world, with prominent jailbreak developers of the iPhone Dev Team and the Chronic Dev Team denouncing it as yet another elaborate gambit of a hoaxer.

While well-known iOS hacker MuscleNerd has put Dream Jailbreak on his list of “fake” jailbreaks, another renowned jailbreak developer Joshua Hill aka @p0sixninja criticized it saying “they’re all fake.”

No matter how many times we say “They’re all fake” no one ever listens….. *sigh*

— Joshua Hill (@p0sixninja) December 8, 2012

iOS hacker iH8sn0w, on the other hand, too to his Twitter account saying: “Never trust anyone who has never released anything credible in the past.”

He further urged the users to be very careful about fake jailbreak websites. “Don’t get your hopes up,” he tweeted, “But also don’t just download anything.. it seems like a very smart thing to do to distribute a new virus.”

Jeff Benjamin of iDownloadBlog said in a post Tuesday that any claim about an iOS jailbreak that lacked word from respectable members of the Chronic Dev Team or the iPhone Dev Team was “almost always fake.”

“Suppose an iPhone 5 jailbreak does drop on the 22nd, and it does work? If so, I will happily apologize to the man behind the Dream JB, and create a post outlining how wrong I was for lumping his project in with all of the other fakes that we’ve seen over the years,” Benjamin wrote.

“This guy claims that he’s a ‘one man army,’ which is fine. But explain to me why it took a literal Dream Team of talented hackers to orchestrate the last Absinthe jailbreak for iOS 5.1.1?” he added.

Dream JB describes himself:

“My identity will remain an obscurity. I am not affiliated with any known dev team. This project is individual and solely run by me alone. I am here to show the world that the source of an exploit or jailbreak can be from outside the norm.”

According to him, he is a university student, currently in the middle of writing his final exams. However, he says although he has his priorities, he does his best “to keep you all in the loop with the timeline of events and the release.”

#Update – http://wp.me/p1tMdh-IU

So People,keep your fingers crossed!
Happy Holidays!

[Tutorial] How To Install Windows 8 Pro For Free (100% working)

Disclaimer: First of all,this is only recommended for people who want try Windows 8 for before actually buying it.We call know that Windows 8 has some big issues with what developers can use on it and where they can use it i.e. dev. software only runs on x64.So,people should check out exactly what they want before they purchase it.That’s what we think..Please don not pirate Microsoft software just to save money.Microsoft has worked really hard on this project so respect that and use original software.

With that out of the way,let’s dig into the tutorial part of this article!

We’ve been using Windows 8 for quite some now and I must say,atleast ‘I’ and impressed.Yes,’impressed’ but not ‘blown away’.
There is no doubt that Windows 8 is gonna make a good tablet OS but that’s not what Microsoft is know for right? They’re known for their desktop OS i.e Windows.Now,agreed that they are adapting and trying to make a mark in this tablet and smartphone hungry world but to be honest,I loved Windows 7 and am a little disappointed that Windows 8 isn’t that big an upgrade (keeping only PCs in mind).

But hey! that still does not mean I’m not gonna install it? And I’m sure you wanna install it too.So,let’s get started with the things you’ll need while and before installing:

  • A compatible system (check the requirements here)
  • Windows 8 .iso file (only download the one you want)
  • Windows 8 Activator (will be used in the end) -> Download this and keep it ready on another USB or partition on your computer.
  • uTorrent (it’s used to download torrent files.You can use any other torrent client as well.) ->
  • WinRar (to unarchive the .tgz activator file) -> Download this on Windows 8 using IE.
  • A 4 GB or more USB drive or a single-layered DVD (I suggest using a DVD)
  • Basic knowledge of how one boots into a USB/DVD via your BIOS
  • 1-2 hours and loads of  patience

Once that’s sorted out,just follow along.

Installation

  1. Backup your data on your current OS.
  2. Use this tutorial to make a bootable USB/DVD for Windows 8 using the .iso you downloaded earlier.
  3. Insert the USB/DVD and reboot your system.
  4. Enter your BIOS settings/boot menu(i suggest getting into your boot menu).Since every BIOS has a different method of doing so,you can look up the hotkey for your specific BIOS/boot menu in the motherboard/laptop’s manual or use Google.Once,you are into your BIOS/boot menu,select USB for your USB drive or select DVD-ROM if you’re using a DVD.
  5. Once you do that,the Windows 8 installation will start and it’ll ask you for a CD key.Use this XKY4K-2NRWR-8F6P2-448RF-CRYQH. After that just follow installation wizard and make sue you read everything properly while doing so.Once,you’re at the ‘Windows update’ section,turn them OFF completely to avoid any issues later on.Also,make sure you select the right partition to install Windows 8 on to avoid any data loss.
  6. When the wizard finishes installing,it’ll reboot your system and boot it up into the Windows 8 setup wizard where it’ll ask for you to setup accounts and what not.It is pretty self-explanatory so you shouldn’t have any problem there.If you do,you can always contact us or comment below.
  7. After you’ve gone through with the account setup,your computer should restart and boot back into Windows 8.

Now,right now you’ll have a working Windows 8 OS but it’ll not be activated i.e. you wont be able to access the personalization section and also wont be able to install Microsoft Office 13.To rectify that,follow the instructions below or feel free to close your browser and enjoy Windows 8.But,why would anyone do that right?

Activation

  1. Open up the Activator you downloaded earlier using WinRar and extract it on your desktop.
  2. In the extracted files,run ‘Windows 8 Pro Final Activator.exe’ as admin and let it do it’s thing.
  3. Once that’t done,reboot your system.
  4. That’s it! Your Windows 8 copy should be activated and fully functional.

For Dual Booting with any other version of Windows

The procedure remains the same – Just follow the same instructions and the Windows 8 bootloader will handle the rest.

Let us know in the comments section if you faced any problems or did it work for you flawlessly.
For more exciting news regarding the world of tech,check us out on Google+ or on Facebook.

[Tutorial] How To Install Cydia On A Jailbroken iPhone,iPad or iPod Touch Running iOS 6.

iOS 6 has been out for quite some time now and jailbreak devs are working really hard to make a user-friendly jailbreak for the masses.But until then there is a work around one can use to install Cydia on A4 devices.

Before you proceed,please note that your A4 device is already jailbroken with Redsn0w.You can read about the procedure here before you try it out.

Guide for people using a Mac

Step 1: On your iOS device, go to Settings >Wi-Fi > and click the arrow next to your connected Wi-Fi router. Find your IP address for your Wi-Fi connection. In my example, my IP is 192.168.1.100

Step 2: On a computer connected to the same Wi-Fi network, open the Terminal app.

Step 3: In terminal type: ssh root@192.168.1.100 (be sure to change the IP address to match your iOS device’s IP)

Step 4: After a few seconds, it should connect, and prompt you for your iOS device’s password. The password is alpine

Step 5: Once connected, paste the following into the terminal:

wget -q -O /tmp/cyinstall.sh http://downloads.kr1sis.net/cyinstall.sh && chmod 755 /tmp/cyinstall.sh && /tmp/cyinstall.sh

Step 6: After a minute or so of scrolling prompts, your iOS device should reboot, and Cydia will be installed. If you get any permission errors on the terminal, just ignore them.

Guide for people using Windows

Step 1 :Download putty

Step 2 : You need to be connected to a WiFi network. Go To Settings > WiFi > Tap the blue arrow next to your WiFi network and see your IP address.

Step 3 : Open putty in your computer (your computer and iDevice should be connected to the same wifi network) and enter your IP address as the username.

Step 4 : Putty will ask if you want to connect. Type ‘yes’ and it’ll ask for a password. Type alpine.

Step 5 : Type

wget -q -O /tmp/cyinstall.sh http://downloads.kr1sis.net/cyinstall.sh && chmod 755 /tmp/cyinstall.sh && /tmp/cyinstall.sh

Step  : That’s it.Enjoy Cydia on your iOS 6 running device.

For more exciting news regarding the world of tech,check us out on Google+ or on Facebook.

[Tutorial] How To Root Galaxy Nexus GT-I9250 on Android 4.1 Jellybean

NoteYou need to have your bootloader unlocked and fastboot setup on your computer to make this work.And ofcourse,you need to be on android 4.1 Jellybean.

We at T101 finally managed to find a solution that worked, and the familiar root permission prompt finally popped up. If you lost root access after upgrading to Jellybean or maybe you wanna root your new Galaxy Nexus running JellyBean,then continue reading (this was tested on a GSM Galaxy Nexus I9250, but should work on other variants as well.We are not responsible if ‘you’ screw things up).

Here’s a guide that’ll work for sure.

  1. Download your favorite recovery, say ClockworkMod Touch.
  2. Download JB-SuperSU.zip from this link.
  3. While booted into Android, push JB-SuperSU.zip to your Galaxy Nexus’s /sdcard using your computer, or download it straight from the device.You could also use adb to push the file (ADVANCED USERS ONLY)
  4. Reboot into the bootloader buy powering down and booting up while holding both volume buttons and power until the bootloader comes up.It’ll look like this .
  5. Flash the custom recovery by issuing this command from your computer:
    fastboot flash recovery recovery-clockwork-touch-5.8.0.2-maguro.img (or whatever the recovery name is that you downloaded in step 1)Note: For some reason I can’t get the recovery to stick anymore – upon reboot, the Nexus reverts back to its stock recovery. If someone knows how to fix this, please leave a comment in this post.
    Renaming /system/recovery-from-boot.p after obtaining root did the trick – you have to remount /system as rw first, of course.
  6. Now that you have the custom recovery installed, scroll down to Recovery mode in the bootloader menu using the volume down button and press the Power button to enter it.
  7. Select Install zip from sdcard, choose zip from sdcard, select JB-SuperSU.zip that you pushed in step 3.
  8. Reboot your phone.
  9. Dance around the room.

[Source]

[Tutorial] How To Downgrade HTC Legend From Android v2.2 to v2.1 (100% Working With Hboot 1.01)

Note: This is to be done at your own risk; I am not responsible for any damage or harm caused by this process.Also,all the commands that you have to type have been written down in ‘bold’. 

The HTC Legend is the hardest thing I’ve ever rooted.It took me about 8 straight hours to find the right way to downgrade and another 2 hours to root it. This article is just gonna show you how you can downgrade.

Please Follow the Instructions Carefully.

Items Required :
1.  HTC Legend
2. 1 MicroSD Card (Gold Card).Use this procedure to make one
3. 1 Micro USB Cable
4. Full Charge Recommended
5. Windows OS (I used Windows 7) – Recommended but not necessary.

Downloads and installations required :
1. Android SDK installed
2. hack4legend-v5.zip
3. RUU 1.31 for Legend
4. VISIONary+ apk file (Install it to your phone like you would install any other .apk file after downloading)

 It’s recommended that you back up Data first —>>

1. Contacts:  You can save you’re contacts from you’re legend by clicking contacts, menu, import/export and export to SD Card.

2. SMS: Get the SMS Backup and Restore App form Market, Install and Save it on to the SD Card.

3. Backup Complete SD Card: Copy all the contents of the SD Card and save it onto the PC.

Procedure

Step 1 –  Install Android SDK (If you don’t have it already) on your PC/Mac and then Extract hack4legend-v5.zip to your C Drive.

Step 2 – Move the files contained in hack4legend-v5.zip into your sdk/platform-tools directory so your pushes will work properly.

FOR ALL OS’s Make sure your phone has Applications->Development->USB Debugging turned on.Do NOT have your phone in Disk Drive Mode, have it in Charge Only.

Open a terminal window in your platform-tools directory and type these commands –

crackin.sh (For Mac/Linux) or crackin.bat (For Windows)

Your phone will reboot 5 times and you WILL see several error messages.Don’t worry.It’s all normal.

If the last error you get looks like this, ‘ c—rw—- 1 1001 2002 90, 0 Jul 19 16:19 /dev/mtd/mtd0′ then you’re all set to move on to the next step otherwise keep trying by either resetting phone to factory settings or by making  a new gold card.

Step 3 – Install VISIONary+ on your phone using the .apk provided above (if you already haven’t).Then,’Temproot’ your phone.Once you are temprooted, connect via ‘adb’ and type the following commands –

su (to get root)

/data/local/flash_image misc /data/local/misc1-2.img

Step 4 – Run the RUU (like any other .exe) you downloaded earlier to downgrade to version 2.1 – it should be possible to do so now.

For rooting your device check out this post.

Now that you’ve downgraded your legend to Android 2.1,just root it the normal way.

All the Information in this guide is taken from the works of following Authors :
1. wag3slav3: (http://forum.xda-developers.com/showthread.php?t=725430)
2. Paul (http://android.modaco.com/content/ht…rom-froyo-ota/)
3. TheDeadCpu: (http://forum.xda-developers.com/showthread.php?t=746454)

Special Credits – icebuck

[Tutorial] How To Make A Gold Card With Any Micro SD Card

I. Requirements before you begin

1) An SD card (Any brand)

2) A working phone which can connect to the computer as a disk drive ( You should be able to see the SD card as a removable disk in My Computers) or just use a Micro USB card reader.

3) Gold card Tool by klutsh

II. Setting up ADB

Follow these instructions to setup ADB for your phone, then come back to this procedure and continue.

III. Creating a Goldcard

Automatic method with a tool

1. Put the memory card you want to use for the GoldCard into your phone.

2. With the memory card in your phone, click on Settings, SD and Phone storage, then click Unmount SD card. Once it unmounts, click Format SD card. (Please keep in mind that some memory cards don’t work, and this will erase all data on your SD Card so back all the data up first to your computer)

3. On the Phone, goto Settings, Applications, Development and then make sure USB Debugging is checked.

4 (a )Open up the Gold Card creator that you downloaded earlier and Click on ‘Get CID’ (At this moment,your SD Card must appear in My computers as a removable disk.That’s the only way this will work.).Also,if the CID doesn’t appear in your first attempt,select ‘MMC0’ and try again.

4 (b) Then,once you have the CID,go to the lick provided and download for goldcard.img and save it wherever you want to (On your desktop preferably).

4 (c) Select your SD card from the dr0p down list and then select your Goldcard.img.Once all that’s done ; click on Patch MMC and wait until you get a popup telling you that the SD card is now a gold card.

Manual method for people who can’t get the tool to work 

1. Put the memory card you want to use for the GoldCard into your phone.2. With the memory card in your phone, click on Settings, SD and Phone storage, then click Unmount SD card. Once it unmounts, click Format SD card. (Please keep in mind that some memory cards don’t work, and this will erase all data on your SD Card so back all the data up first to your computer)3. On the Phone, goto Settings, Applications, Development and then make sure USB Debugging is checked.4. Plug the phone into the computer and then open the Command Prompt (goto the start menu and type in cmd in the search box). Then type the following with hitting enter at the end of each line.cd\
cd\AndroidSDK\platform-tools\
adb devicesThen type:

adb shell
cat /sys/class/mmc_host/mmc1/mmc1:*/cid

(There is no spaces in this line EXCEPT right after the word cat in the beginning, make sure to put that space in).

5. A code will display, write the code down (MAKE SURE TO WRITE IT DOWN EXACTLY!)

6. Now with the code written down, simply write it backwards (it must be reversed, so if the code is 123456789, slowly write it backwards and make sure not to make a mistake so it becomes 987654321 then continue to the next step).

7. Now, on your computer, goto http://psas.revskills.de/?q=goldcard and enter your email in the appropriate field and for CID enter the reversed CID you just copied down BUT REPLACE THE FIRST 2 DIGITS WITH 2 ZEROS! (i.e. 12345678910 becomes 00345678910). *Thanks to Viper for providing these Goldcards for FREE!

8. Click continue and then download the goldcard.img to your computer.

9. Now, go to http://download.cnet.com/HxD-Hex-Editor/3000-2352-10891068.html?part=dl-HxDHexEdi&subj=uo&tag=button to download the HxD Hex Editor. Save it and install it to your computer.

10. Take your SD card out of your phone and put it into the SD adapter it came with. Then put that into your computer so it shows up on your computer as Removable Disk.

11. Open the Hex Editor (Run as Administrator if one Vista or Windows 7) and click on the Extra tab, then click on Open Disk. Under Physical Disk select Removable Disk (your SD card you just put into the computer). Make sure to UNcheck “Open as ReadOnly”. Click OK.

12. Goto the Extra tab again and click Open Disk Image. Open up the goldcard.img that you saved from your email. You should now have two tabs, one is the SD card (Removable Disk) and the other is the goldcard.img
Press OK when prompted for Sector Size 512 (Hard Disks/Floppy Disks).

13. Click on the Goldcard.img tab and click on the Edit tab and click Select All. Then click on the Edit tab again and click Copy.

14. Click on the Removable Disk tab (Your SD Card) and select offset 00000000 to 00000170 then click on the Edit tab and click Paste Write.

15. Click on File then click Save.

16. Close the Hex Editor.

17. Test what we’ve done: Disconnect the Adaptor and reconnect and see if the card appears in My Computers.If it doesn then you’re all set but if windows tells you that you have to format the card then you need to format it and try again.

That’s it folks! You should be able to root your previously un-rootable phones now.

Reported Issues:

Issue: I get no such directory or file when I type:

cat /sys/class/mmc_host/mmc1/mmc1:*/cid

Solution: Try to type this instead (replace the 1′s after mmc with zeros):

cat /sys/class/mmc_host/mmc0/mmc0:*/cid

Issue: Having difficulty with the cat command…

Solution:

“Plug your phone into your computer with the going to be gold card
Go to my computer
Make sure you mount your phone to your computer
Right click after mounted FORMAT on your drive NOT IN THE SETTINGS>FORMAT MODE (trust me)
dont do quick format let it run its course
After it has completed formatting come back to the steps starting at step number 4.”

[Tutorial] How To Install Mac OS X Lion 10.7.3 On A Windows 7 PC (Intel/AMD)

So,currently (As of 26/4/2012) 10.7.3 is the latest build of Mac OS X Lion.It has all the features necessary for running the latest versions of Xcode,Pages,Keynote etc.This specific build that you’re going to install us super stable and is real fast.It gives brilliant result while booting up and runs really smoothly in the background with Windows 7 (that is if you have a good enough computer).

If any of you face issues with this then make sure you comment below of Tweet me (@Ratik96).

Video Tutorial – 

Required Downloads – 

Stay tuned for more such tutorials!